In metallurgy, stainless steel also called as inox steel or inoxidizable steel. It is a steel material alloyed with high content of chromium and nickel, where
Minimum Cr at 10.5%
Minimum Ni at 8%
Maximum Carbon at 1.5%
As we know, stainless steel flange is impressed by it's great corrosion resistance, which because of the elements of Chromium, and as Cr increased, better resistant performances will be gained.
On the other hand, additions of Molybdenum will increase corrosion resistance in reducing acids and against pitting attack in chloride solutions. So there are different grades of stainless steel with varying Cr and Mo compositions to suit the environment with required to be alloyed.
Advantages:
Resistant to corrosion and staining
Low maintenance
Bright familiar luster
Steel Strength
| Tuotteen nimi: Ruostumaton teräslaippa | |
| Tyyppi | Slip On, Weld Neck, Socket Weld, Plate, Blind, Threaded, Reduction, Lap Joint, Spectacle jne. |
| Arvosana | F304, F304L, F309S, F310S, F316, F316L, F316Ti, F317, F317L, F321, F347, S30815 / 253MA, S31254 / 254SMO, N08904 / 904L, F51, F53, F55 jne. |
| Vakio | ASTM A182 / 182M, ASME B16.5, ASTM A240, ASME B16.47-A, ASME B16.47-B, JIS B2220 jne. |
| Koko | 1/2"- 48" |
| Paine | 150-2500 LBS |
| Edessä | Nostetut kasvot (RF), litteät kasvot / koko kasvot (FF), renkaanivelet (RTJ) |
| Pakkaus | Puiset laatikot / vanerikotelot tai asiakkaiden pyynnöstä. |
| Sovellus | Öljyn ja kaasun kuljetus, LNG, petrokemia, ydinvoima, laivanrakennus, massa ja paperi, jätevedenkäsittely, rakentaminen, lääketiede, elintarvikkeet, koristelu ja muut. |
| Muut standardit | AWWA C207, BS4504, SABS 1123, TAULUKKO D, GOST 12820 / 1-80, AS 2129 jne. |
Laippojen tyypit:
| Laipat ruostumattomasta teräksestä | Laipat ruostumattomasta teräksestä | Ruostumattomasta teräksestä valmistetut renkaan laipat |
| Ruostumattomasta teräksestä valmistetut silmälaipat | Ruostumattomasta teräksestä valmistetut hitsauskaulalaipat | Ruostumattomasta teräksestä valmistetut korkean laipan laipat |
| Laipat ruostumattomasta teräksestä | Laipat ruostumattomasta teräksestä | Kaulalaipat ruostumattomasta teräksestä |
| Laipat ruostumattomasta teräksestä | Laipat ruostumattomasta teräksestä | Ruostumattomasta teräksestä valmistetut laipan laipat |
Many different types of stainless steel flanges can be incorporated into a piping system. Stainless steel flanges are highly resistant to rust, are much stronger and can out perform carbon steel flanges and provide much more corrosion resistance than your aluminum or steel flanges.
ASME (American Society of Mechanical Engineers) flanges are engineered to meet certain standards. These standards are specified by the ASME and by the American National Standards Institute (ANSI). There are certain specifications in all flanges, each depending on the certain type of flange. This similarity ensures consistency with the same types of flanges used and replaced now and in the future.
